Відео

lol you opted for a fuel line switch over a fuel filter..? 🤔

Also FYI all kobalt batteries are interchangeable....XYR or Max...2Ah...4Ah or more! Seriously get educated before you even post.

Lol, Please stop making ridiculous statements and reviews with absolutely 0 knowledge and expertise! You make engineers like me watching this crap just shake our heads at the stupidity of your incompetence. Yes there are materials that do deteriorate with time....eggs perhaps, your cheese as well...but, sanding discs, grinding discs, sandpaper discs or dill bits...etc will be more than good for not 2 to 3 years as you state based on your observation of an expiry date, but over 10 to 15 years if stored properly and away from moisture

I bought a 6 pack of extremely strong magnets from Amazon with the idea to mount the same magnet strip shown in your video to my tool box. I didn't want to drill holes in the lid to mount the strip. The ideas worked, but I cracked some of the magnets trying to drill and add threads for screws. Here's my question: Do the bolts in the magnets you have with the hooks unscrew? Is the hole threaded? Thanks for making this informative video!

M3 puede ayudar xon ek reseteo de esta kavadora por favor

Reset of this machine please

The handle always loosens, piece of shit handle. Tools though work great!

Great video, thanks for posting! I went through this repair; unfortunately, when I try to run a test cycle it kicks off an error code (F50) after filling with water. The motor wants to go, but the spin and agitate won't engage... Anyone have a similar problem? Any tips / tricks to troubleshoot? It's almost like it just won't engage with the drive shaft.

So do I leave the umbrella switch on throughout the daytime so the it lights up doing the night ?

We’re having the same problem with our GE over the range microwave (model number: JVM1740SP2SS) Managed to open the door but not sure what numbers to look for on the switches. Just called GE appliance and they were super unhelpful. Any assistance?

How do you remove the basket

Thank you for this video. Others need to be aware that there is a gasket on each side of the tube. The gasket in mine that the was shown damaged in the video, was actually in good order on mine. When I removed the tube from the head, the other gasket was a mess. I gently pulled it out and trimmed it like the video showed, put a little 3in1 on it (and the other mating parts), and now works even better than it ever has. When you take the tube out of both ends, you can also take the head plate with the valve out for cleaning and making sure all the debris is removed. Now that I know better how the compressor operates, I am going to try and improve the operation of my Harbor Freight 21 Gal compressor (which has been deteriorating in performance over the last few years).

It's on sale right now for around 180 at Lowe's

just broke 2 of my studs.

Can you use them to make a joint on live wires?

i know this is an older video. They make the robbies green and red because Green robertson = #1, Red Robertson = #2. Robertson is pretty much all we use in construction in canada. Most people here call em by their colours and not their size.

Just did this. Your video ia great and easy to follow. Gracias

Poor lighting, can't see exactly what was actually disconnected.

Hello I have a question , I hope you can help me out please.... How do you fix the wheel from rubbing against the Blade flap? The wheel won't move.

I have the same lathe I nk am missing the Spindel lock. I have tried sears they no longer have the part. I can back the nut off to get it to spin. If you can send me the measurements off of that part so I can get one made that would be great. I am also looking for the owners manual Thank you for your time.

My 24 volt battery operated cobalt nailor worked one time when I put up a little bit of trim now I took it out to do another project and I haven't even unwrapped the other battery and it just won't work and the battery has the three dots that light up telling me that the battery is full and I can't give it to exit a nail at all. Little brad nails even what do I do?

Thanks!

Great tool review!

a tidy looking tool ,,

Great video

Just what I needed. I agree, the replacement part is much better than the original petcock system.

Not a lot of torque available in the 90 degree position.

but its just a generic usb cable that can be bought off of amazon....... you didnt have to buy a whole g4 just for a cable. theres nothing special about the cable because is a wifi camera unit, no data is being transmitted through the cable.

Yeah...the dipstick placement is straight wonky. Needing 2' of extentions will be me using 4 6" extensions 😅. Love your shadetree mechanic tube tied to the extension. Thanks for the video, dude!

Thanks😎

Hi I was wondering if you could answer a quick question for me. Does the direction lever at the top wobble back and fourth as your turning the ratchet?

Great video. I’m new to this wrench. Bought in yard sale with no manual… can you tell me best speed to use? Also what is the screw button for?

I have the same model but prime bulb has 3 lines, how do I hook it back up properly

is this the same company as Astro AI products sold on Amazon?

Great video. Valuable even a few years later. The only suggestion I have is to replace drive and blade belts during this 3-year as well. Already have the time invested so why not. Thank you!!

great video and glad you saved me the time of looking up the torque settings.

Дякую

Reading many of the comments sounds like many are using it for the every single nail they are driving....if you used it only for hard to reach areas where you cant swing a hammer or fit a framing nailer i am sure it would do a much better job. If it was meant to drive every single nail on your framing project, this little tool would reflect that in its cost.

Wranglers are junk I got bought over 10 pairs an the Same thing has happened to all of them the crotch rips an the back pockets an belt loops break they are junk never buying them again

I've always had good luck heating a bolt with map gas, then immediately throwing cold water on it. Sometimes I'll do it a few times, then try breaking it free. Sometimes I'll do this then apply heat to the surrounding area (that the bolt threads into, not the bolt itself) and it works well. Of course, sometimes you can't use heat because of wires, seals, etc so this might do the trick. Or even heat it with map gas, then spray this on it.

I have full complete set of USA Masterforce wrenches. SAE/Metric. Still brand new in they're holders. Bought few years back like you show on clearance display. Very nice wrenches and proud to own them. I'll throw a video up! 👍

Super helpful video! Thanks so much for posting!

Long ago we used to use r12.

Thing works great! Until the nozzles plug. And try and replace them with original parts. Aint happening. NEVER buy one of these from Kobalt if they aren't going to supply the replacement parts. Things pretty much worthless now.

Trying to figure out how to put a new cable in mine. Can't find a manual either

Too much water, makes a mess. I just put a wet sponge next to the blade, to keep it wet

can you provide the step by step on programming? pretty please???

My lower handle has cracked on mine 2 × now. I bought a replacement $155. on Amazon and that has cracked as well. Both had to be welded. I'm very aggregated at this Toro.

Thank you for posting this video. I was able to order the kit and complete the job with confidence. Really appreciate your help. Keep up the great work.

Thanks you for the video. Might be a good time to replace that plastic OEM T fitting to one made of metal. They break easy after some years of use. Looks like you have the original plastic. It's on the left side under front cover. They were on Ebay with the two bigger hoses for $31 shipped.